Abstract
One of the high frequency switching power supply circuits is the flyback converter. Due to its inexpensive cost and electrical isolation properties, it is mostly employed in low power applications. It is well known that high frequency switching results in losses and lowers inverter efficiency, particularly at low powers. Consequently, a flyback DC-DC converter that is run in a closed control loop is explained in this study. Closed-loop control is the proposed topology for the flyback converter. For the same input/output conditions, the findings from the closed-loop converter are compared to those from the open-loop feedback topology. A closed-loop flyback has been found to be more effective than an open-loop flyback. MATLAB simulates the outcomes. One of the high frequency devices is the flyback converter.
References
- “Importance of Fly Back Converter for Electric Vehicles” By Dr K. Ravichandrudu, P.Suman Pramod Kumar, published in IEEE International Conference on Power, Control, Signals and Instrumentation Engineering on 2017
- “Closed Loop Control of Flyback Converter with PV as a Source” By Rajat Singh, Sourav Bose, Prakash Dwivedi, published in IEEE National Institute of Technology Uttarakhand, India on 2020
- “Practical Feedback Loop Design Considerations for Flyback Converter Using UCC28740” By SW Lee published in Texas Instrument on May 2020
- “Feedback Control Design of Off-line Flyback Converter” by Edwin Wang published in IEEE International Conference on Power, Control, Signals, and Instrumentation Engineering on 2017 on June 2014
- “Design and Control of a Battery Charger/Discharger Based on the Flyback Topology” by Carlos Andres Ramos, Juan David Bastidas, Andres Julian Saavedra, published in MDPI on 9 November 2021.
- “Design and Implementation of a Digital Control System for Flyback DC-DC Converters” by H. Abu-Rub, M. Malinowski, and K. Al-Haddad, IEEE Transactions on Power Electronics, vol. 20, no. 5, pp. 1052-1060, Sep. 2005.
- “Design and Implementation of a Closed-Loop Control System for a Flyback Converter Using a Digital Signal Processor” by S. K. Kim, S. Park, and S. Lee, Journal of Power Electronics, vol. 9, no. 2, pp. 231-239, Mar. 2009.
- "Design and Implementation of a Digital PWM Controller for a Flyback Converter" by S. M. Lee, S. H. Kim, and S. K. Kim, Journal of Power Electronics, vol.9, no. 4, pp. 616-623, Jul.2019.
- "A Digital Control Method for Flyback Converters with Improved Dynamic Response" by Y. Liu, Y. Li, and Y. Li, Journal of Power Electronics, vol. 16, no. 3, pp. 932-939, May 2016.
- "Design and Implementation of a Digital Current-Mode Control System for Flyback Converters" by S. Zhao, Y. Zhang, and Y. Wei, Journal of Power Electronics, vol. 14, no. 6, pp. 1190-1197, Nov. 2014.
- "Digital Control of a Flyback Converter with Constant On-Time Control" by C. C. Tsai, Y. H. Chen, and C. H. Chen, IEEE Transactions on Power Electronics, vol. 28, no. 11, pp. 5144-5153, Nov. 2013.
- "Design and Implementation of a High Performance Digital Control System for Flyback Converters with Active Clamp" by H. Abu-Rub, M. Malinowski, and K. Al-Haddad, IEEE Transactions on Industrial Electronics, vol. 55, no. 2, pp. 810-822, Feb. 2008.
- "Design and Implementation of a Digital Control System for Flyback Converters with Input Voltage Feedforward" by Y. Du and Y. Liu, Journal of Power Electronics, vol. 16, no. 4, pp. 1484-1492, Jul. 2016.
- "Design and Implementation of a Digital Control System for Flyback Converters with Adaptive Dead-Time Compensation" by G. Zhang, Y. Li, and Y. Li, Journal of Power Electronics, vol. 17, no. 1, pp. 140-148, Jan. 2017.
