Design and Development of Three Phase Detuned Filter Reactor for Reduction of Harmonic Distortion in Power Systems
Volume-5 | Issue-2

Simulation of Electromagnetic Waves Propagation Using Matlab
Volume-6 | Issue-2

A Review on Low Power VLSI Design Models in Various Circuits
Volume-4 | Issue-2

Analysis of Soil Nutrients based on Potential Productivity Tests with Balanced Minerals for Maize-Chickpea Crop
Volume-3 | Issue-1

PMSM Speed Control using SVPWM Technique
Volume-5 | Issue-2

FPGA Based 32-Bit Hybrid Ripple Ling Carry Adder
Volume-7 | Issue-2

Quantum Speedup for Linear Systems: An Analysis of the HHL Algorithm Using IBM Qiskit
Volume-6 | Issue-4

Evaluating Performance of Different Machine Learning Algorithms for the Acute EMG Hand Gesture Datasets
Volume-4 | Issue-3

Performance Analysis of High-Speed Parallel Prefix Adders for Arithmetic Applications
Volume-7 | Issue-3

Design of Class F Power Amplifier for Sub 6 GHz
Volume-5 | Issue-1

SMART STREET SYSTEM WITH IOT BASED STREET LIGHT OPERATION AND PARKING APPLICATION
Volume-1 | Issue-1

A Review on Meshing Techniques in Biomedicine
Volume-3 | Issue-4

ENERGY AND POWER EFFICIENT SYSTEM ON CHIP WITH NANOSHEET FET
Volume-1 | Issue-1

Abstractive Summarization System
Volume-3 | Issue-4

Transistor Sizing using Hybrid Reinforcement Learning and Graph Convolution Neural Network Algorithm
Volume-3 | Issue-3

MIMO BASED HIGH SPEED OPTICAL FIBER COMMUNICATION SYSTEM
Volume-1 | Issue-2

Industrial Quality Prediction System through Data Mining Algorithm
Volume-3 | Issue-2

Automated Nanopackaging using Cellulose Fibers Composition with Feasibility in SEM Environment
Volume-3 | Issue-2

A Two Stage Task Scheduler for Effective Load Optimization in Cloud – FoG Architectures
Volume-3 | Issue-3

Comparative Analysis an Early Fault Diagnosis Approaches in Rotating Machinery by Convolution Neural Network
Volume-3 | Issue-2

Home / Archives / Volume-4 / Issue-2 / Article-6

Optimization of Automated Real-Time Dashboards

D. Sasikala ,  K. Venkatesh Sharma
Open Access
Volume - 4 • Issue - 2 • june 2022
https://doi.org/10.36548/jei.2022.2.006
114-121  682 PDF
Abstract

A dashboard is a powerful tool that enables users to verify, analyze, and process all kinds of data. It represents information on a single screen that helps get it just whenever it is essential and achieve the set goals in time. The category of a dashboard varies due to the nature of data they signify and the drive of the corporate they are castoff by. To blueprint a dashboard that will encounter the entire necessities and wholly accomplishing its targets, custom the ideologies of worthy dashboard sketch. But functioning on the project task, continually ponder its objective and the gain of the target spectators. Create it plain, operational, functional and spotlight on mandate demands. Ensure not to agree with the blueprint that complicates customers via the content, besides UI that will require a clear base fitting into the context. Group data, make it consistent, and add custom facets if applicable. Optimize them; finally, get feedback from customers to find out what's working perfectly and what is to be amended to mark them even happier. In future this optimized dashboard can be blended with Machine Learning, Deep Learning and Artificial Intelligence for amplifying their performance, reducing their cost and time.

Cite this article
Sasikala, D., and K. Venkatesh Sharma. "Optimization of Automated Real-Time Dashboards." Journal of Electronics and Informatics 4, no. 2 (2022): 114-121. doi: 10.36548/jei.2022.2.006
Copy Citation
Sasikala, D., & Sharma, K. V. (2022). Optimization of Automated Real-Time Dashboards. Journal of Electronics and Informatics, 4(2), 114-121. https://doi.org/10.36548/jei.2022.2.006
Copy Citation
Sasikala, D., et al. "Optimization of Automated Real-Time Dashboards." Journal of Electronics and Informatics, vol. 4, no. 2, 2022, pp. 114-121. DOI: 10.36548/jei.2022.2.006.
Copy Citation
Sasikala D, Sharma KV. Optimization of Automated Real-Time Dashboards. Journal of Electronics and Informatics. 2022;4(2):114-121. doi: 10.36548/jei.2022.2.006
Copy Citation
D. Sasikala, and K. V. Sharma, "Optimization of Automated Real-Time Dashboards," Journal of Electronics and Informatics, vol. 4, no. 2, pp. 114-121, Jun. 2022, doi: 10.36548/jei.2022.2.006.
Copy Citation
Sasikala, D. and Sharma, K.V. (2022) 'Optimization of Automated Real-Time Dashboards', Journal of Electronics and Informatics, vol. 4, no. 2, pp. 114-121. Available at: https://doi.org/10.36548/jei.2022.2.006.
Copy Citation
@article{sasikala2022,
  author    = {D. Sasikala and K. Venkatesh Sharma},
  title     = {{Optimization of Automated Real-Time Dashboards}},
  journal   = {Journal of Electronics and Informatics},
  volume    = {4},
  number    = {2},
  pages     = {114-121},
  year      = {2022},
  publisher = {IRO Journals},
  doi       = {10.36548/jei.2022.2.006},
  url       = {https://doi.org/10.36548/jei.2022.2.006}
}
Copy Citation
Keywords
Automated dashboards real-time dashboards user-friendly dashboards collaborative dashboards automated real-time dashboard optimization
Published
26 July, 2022
×

Currently, subscription is the only source of revenue. The subscription resource covers the operating expenses such as web presence, online version, pre-press preparations, and staff wages.

To access the full PDF, please complete the payment process.

Subscription Details

Category Fee
Article Access Charge
15 USD
Open Access Fee Nil
Annual Subscription Fee
200 USD
After payment,
please send an email to irojournals.contact@gmail.com / journals@iroglobal.com requesting article access.
Subscription form: click here