Journal of Electronics and Informatics
IRO Journals
Volume 5 — Issue 2 — June 2023

Enhancement of Induction Motor Efficiency using Nanocoated with Enamel

https://doi.org/10.36548/jei.2023.2.003
Ponmathy M
Department of Electrical and Electronics Engineering, Anna University Regional Campus, Coimbatore, India
S. Sumathi
Department of Electrical and Electronics Engineering, Anna University Regional Campus, Coimbatore, India
Cianna A
Department of Electrical and Electronics Engineering, Anna University Regional Campus, Coimbatore, India
PDF
PDF

How to Cite

M, Ponmathy, S. Sumathi, and Cianna A. 2023. “Enhancement of Induction Motor Efficiency Using Nanocoated With Enamel”. Journal of Electronics and Informatics 5 (2): 140-53. https://doi.org/10.36548/jei.2023.2.003.
ACM ACS APA ABNT Chicago Harvard IEEE MLA Turabian Vancouver AMA

Download Citation

Endnote/Zotero/Mendeley (RIS) BibTeX

Keywords

— Induction motor
— Nano filler
— Enamel
— Efficiency
Published: 24-05-2023

Abstract

Heat generation that affects the ’performance and lifespan of the motor's, are the primary problem with asynchronous motors. These entities are primarily the result of inadequate electrical motor insulation, which can be avoided by utilizing enamel-filled Nano filler insulation. It has been demonstrated over the past few decades that including a Nano filler to enamel utilized in induction motors has improved its characteristics. This study investigates the performance of asynchronous motor coated with Nano filler consisting of Al2O3 and Zn O along with enamel. The motor's efficiency, power factor, torque, and other parameters are analysed before and after the Nano coat. The findings demonstrated that the Nano coating technology significantly improved the motor's efficiency, power factor, and torque, indicating a reduction in energy losses due to friction and heat. The study suggests that the use of hybrid Nano filler can be a valuable investment for industrial applications that require high reliability and efficiency.

References

  1. Selvaraj, D. Edison, and C. Pugazhendhi Sugumaran. "Comparative analysis of dielectric properties of enamel filled with various nanofillers such as ZrO2, Al2O3, CNT and ZnO." International Journal of Science and Engineering Applications 1, no. 1 (2012): 51-55.
  2. Ganesan, J., S. Jeyadevi, and D. Edison Selvaraj. "Performance Analysis of Single Phase Induction Motor Coated with Al^ sub 2^ O^ sub 3^ Nano Filler Mixed Enamel." International Journal on Recent Trends in Engineering & Technology 10, no. 2 (2014): 187.
  3. Sumathi, S., R. Rajesh, and P. Subburaj. "Investigation of dielectric strength of transformer oil based on hybrid TiO2/Al2O3/MoS2 Nanofluid using taguchi and response surface methodology." IETE Journal of Research 67, no. 6 (2021): 817-825.
  4. Sumathi, S., and R. Rajesh. "Improvement on the characteristics of transformer oil using nanofluids." Current Science 118, no. 1 (2020): 29.
  5. Sugumaran, Pugazhendhi. "C, Mohan MR, and Udayakumar." K,"Investigation of Dielectric and Thermal properties of Nano-filler (ZrO2) Mixed Enamel", IEEE Transaction on Dielectrics and Electrical Insulatin 17, no. 6 (2010).
  6. Sumathi, S., and P. Subburaj. "Critical Investigation of Minimum Field Conductor for Overhead Transmission Lines." Middle-East Journal of Scientific Research 24, no. 12 (2016): 3772-3779.
  7. Preetha, P. "Prediction of AC Breakdown Voltage of Mineral Oil Nanofluid." In 2020 IEEE REGION 10 CONFERENCE (TENCON), pp. 336-340. IEEE, 2020.
  8. Sardast, Roghieh, Faramarz Faghihi, and Mahdi Vakilian. "Study on Different Dimensions of C-type Corona Rings in 400 kV Insulator Strings Based on FEM Analysis of Electric Field Distribution." In 2019 27th Iranian Conference on Electrical Engineering (ICEE), pp. 673-678. IEEE, 2019.
  9. Oraee, Hashem. "A quantative approach to estimate the life expectancy of motor insulation systems." IEEE Transactions on dielectrics and electrical insulation 7, no. 6 (2000): 790-796.
  10. Sumathi, S., P. Subburaj, R. Rajesh, and R. Suresh Kumar. "Enhancement of Efficiency in Nanocoated Induction Motor." World Applied Sciences Journal 35, no. 2 (2017): 325-329.
  11. Rajesh, R., and S. Sumathi. "Certain performance investigation on hybrid TiO2/Al2O3/MoS2 nanofiller coated 3∅ induction motor: a Taguchi and RSM based approach." Energy Reports 6 (2020): 1638-1647.
  12. Saravanakumar, K., J. Samson Isaac, and R. Rajesh. "Al2O3-coated Fe3O4/graphene/TiO2 hybrid nanocomposite mixture as anode material for lithium-ion batteries." CURRENT SCIENCE 123, no. 2 (2022): 177.
  13. Ganesan, Lieutenant J., S. Jeyadevi, and D. Edison Selvaraj. "Analysis of Harmonics and Electromagnetic Interference in Single Phase Induction Motor Coated with Al2O3 Nano filler Mixed Enamel." (2013).
  14. Selvaraj, D. Edison, C. Pughazhendhi Sugumar, J. Ganesan, and M. Raj Kumar. "Nano filler mixed enamel coated single phase capacitor run induction motor." Global Journal of Research in Engineering (2014).
  15. Senthur, N. S., C. Anand, M. Ramesh Kumar, P. V. Elumalai, Mohamed Iqbal Shajahan, Ali Cemal Benim, Emad Abouel Nasr, H. M. A. Hussein, and M. Parthasarathy. "Influence of cobalt chromium nanoparticles in homogeneous charge compression ignition engine operated with citronella oil." Energy Science & Engineering 10, no. 4 (2022): 1251-1263.