Journal of Electronics and Informatics
IRO Journals
Volume 5 — Issue 3 — September 2023

Implementation of OTA in 90nm Technology with Bandgap Reference Application

https://doi.org/10.36548/jei.2023.3.005
Halesh M R
Electronics and Communication Engineering, JSS Science and Technology University, Mysuru, India
Pavan S
Electronics and Communication Engineering, JSS Science and Technology University, Mysuru, India
Pappuru Tejaswini
Electronics and Communication Engineering, JSS Science and Technology University, Mysuru, India
PDF
PDF

How to Cite

R, Halesh M, Pavan S, and Pappuru Tejaswini. 2023. “Implementation of OTA in 90nm Technology With Bandgap Reference Application”. Journal of Electronics and Informatics 5 (3): 307-19. https://doi.org/10.36548/jei.2023.3.005.
ACM ACS APA ABNT Chicago Harvard IEEE MLA Turabian Vancouver AMA

Download Citation

Endnote/Zotero/Mendeley (RIS) BibTeX

Keywords

— OTA
— Band gap Reference
— CMOS
— VLSI
— VCO
— VCF
— SC
Published: 10-10-2023

Abstract

Operational Transconductance Amplifier (OTA) is the basic building block of Analog circuit with linear input/output characteristics. Because it associates closely linked parameters like noise and settling performance, the current design methodologies for two-stage OTAs frequently result in sub-optimal solutions. The study discusses the implementation of an Operational transconductance amplifier (OTA) with a bandgap reference (BGR) circuit and its importance in providing a stable and accurate reference voltage for various analog and digital circuits. The combination of OTA and BGR provides a stable and accurate reference voltage that can be used in various analog and digital circuits. OTAs are used to drive high capacitive loads. To scale the dimensions of Complementary Metal Oxide Semiconductor (CMOS) technology requires proportional scaling, also taking supply voltage into consideration. In addition to the simplicity and strong performance that the Band Gap Reference (BGR) achieves as a load for the OTA circuit, the architecture of OTA with BGR as load is easily adaptable to attain high accuracy. Because the performance of the used amplifier has a significant impact on the OTA’s performance, consideration must be given to the design and its architecture. Therefore, it is essential to carry out a comparison analysis in order to get the optimal results of the outputs of OTA having BGR as the load.

References

  1. Bhavana Rani, Jasdeep Kaur Dhanoa. "Designing of MOS Transistors in Two Stage OTA with Miller Compensation". International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, 2017.
  2. Wang, Han, and Qing Ye. "0.5-V operational transconductance amplifier for CMOS bandgap reference application." In 2006 8th International Conference on Solid-State and Integrated Circuit Technology Proceedings, pp. 1705-1707. IEEE, 2006..
  3. Colombo, Dalton M., and Gilson I. Wirth. "Impact of Different Op-Amps in CMOS Bandgap References Implemented in 0.18 µM Technology." TABLE II. SIMULATED PERFORMANCE OF THIS WORK TABLE I. SIMULATED PERFORMANCE COMPARED WITH OTHER WORKS.
  4. Fortes, Anderson, Luiz Antonio da Silva Jr, Robson Domanski, and Alessandro Girardi. "Two-stage OTA sizing optimization using bio-inspired algorithms." Journal of Integrated Circuits and Systems 14, no. 3 (2019): 1-10.
  5. Saravanakumar, O. M., N. Kaleeswari, and K. Rajendran. "Design and analysis of two-stage operational transconductance amplifier (OTA) using cadence tool." Int J Emerg Technol Adv Eng 4, no. 4 (2014).
  6. Attili, Imtinan B., and Soliman A. Mahmoud. "Optimizing the performance of a low power–area efficient OTA design that is based on hybrid current shunting technique." In 2018 International SoC Design Conference (ISOCC), pp. 95-96. IEEE, 2018.
  7. Yodtean, Apiradee. "A cmos ota and implementation." In 2014 International Symposium on Intelligent Signal Processing and Communication Systems (ISPACS), pp. 094-098. IEEE, 2014.
  8. Rani, D. Gracia Nirmala, G. Gifta, M. Meenakshi, C. Gomathy, and T. Gowsalaya. "Design and analysis of CMOS low power OTA for biomedical applications." In 2019 4th International Conference on Recent Trends on Electronics, Information, Communication & Technology (RTEICT), pp. 871-876. IEEE, 2019.
  9. Rodrigues, Sharil Nivitha, and P. S. Sushma. "Design of Low Transconductance OTA and its Application in Active Filter Design." In 2019 3rd International Conference on Trends in Electronics and Informatics (ICOEI), pp. 921-925. IEEE, 2019.
  10. Maia, Nedson J., Arnaldo R. Sanchez, Robson L. Moreno, Tales C. Pimenta, and Luis H. Carvalho Ferreira. "A Low Power CMOS Operational Transconductance Amplifier with Improved CMRR." In 2020 32nd International Conference on Microelectronics (ICM), pp. 1-4. IEEE, 2020..
  11. Ghosh, Kasturi, and Baidya Nath Ray. "Design of a new high order OTA-C filter structure and its specification based testing." In 18th International Symposium on VLSI Design and Test, pp. 1-6. IEEE, 2014.
  12. Giustolisi, Gianluca, and Gaetano Palumbo. "Design of three-stage OTA based on settling-time requirements including large and small signal behavior." IEEE Transactions on Circuits and Systems I: Regular Papers 68, no. 3 (2020): 998-1011.
  13. Ray, Baidyanath, Parimal Pal Chaudhuri, and Prasanta Kumar Nandi. "Design of OTA based field programmable analog array[CMOS VLSI]." In VLSI Design 2000. Wireless and Digital Imaging in the Millennium. Proceedings of 13th International Conference on VLSI Design, pp. 494-498. IEEE, 2000.
  14. Wei, Jing, and Weidong Wang. "A wide tunable range pseudo-differential OTA." In 2011 International Conference on Electric Information and Control Engineering, pp. 134-137. IEEE, 2011.