Industrial Quality Prediction System through Data Mining Algorithm
Volume-3 | Issue-2

Comparative Analysis an Early Fault Diagnosis Approaches in Rotating Machinery by Convolution Neural Network
Volume-3 | Issue-2

Nakagami-m Fading Detection with Eigen Value Spectrum Algorithms
Volume-3 | Issue-2

Abstractive Summarization System
Volume-3 | Issue-4

Design of Adaptive Estimator for Nonlinear control system in Noisy Domain
Volume-3 | Issue-3

Automated Nanopackaging using Cellulose Fibers Composition with Feasibility in SEM Environment
Volume-3 | Issue-2

Comparative Analysis of Temperature Measurement Methods based on Degree of Agreement
Volume-3 | Issue-3

Transistor Sizing using Hybrid Reinforcement Learning and Graph Convolution Neural Network Algorithm
Volume-3 | Issue-3

A Review on Meshing Techniques in Biomedicine
Volume-3 | Issue-4

EL DAPP - An Electricity Meter Tracking Decentralized Application
Volume-2 | Issue-1

SMART STREET SYSTEM WITH IOT BASED STREET LIGHT OPERATION AND PARKING APPLICATION
Volume-1 | Issue-1

ENERGY AND POWER EFFICIENT SYSTEM ON CHIP WITH NANOSHEET FET
Volume-1 | Issue-1

Abstractive Summarization System
Volume-3 | Issue-4

A Review on Meshing Techniques in Biomedicine
Volume-3 | Issue-4

MIMO BASED HIGH SPEED OPTICAL FIBER COMMUNICATION SYSTEM
Volume-1 | Issue-2

Industrial Quality Prediction System through Data Mining Algorithm
Volume-3 | Issue-2

Comparative Analysis of Temperature Measurement Methods based on Degree of Agreement
Volume-3 | Issue-3

Transistor Sizing using Hybrid Reinforcement Learning and Graph Convolution Neural Network Algorithm
Volume-3 | Issue-3

VIRTUAL REALITY SIMULATION AS THERAPY FOR POSTTRAUMATIC STRESS DISORDER (PTSD)
Volume-1 | Issue-1

Comparative Analysis an Early Fault Diagnosis Approaches in Rotating Machinery by Convolution Neural Network
Volume-3 | Issue-2

Home / Archives / Volume-6 / Issue-2 / Article-1

Volume - 6 | Issue - 2 | june 2024

A Study of Bidirectional Electric Vehicle Charging using MATLAB Simulink
G. Anuja  , S. E. Kepha Rhenie, Remsangpuii Khiangte, M. R. Sridhar, R. Sridharan, S. Elango
Pages: 77-84
Cite this article
Anuja, G., S. E. Kepha Rhenie, Remsangpuii Khiangte, M. R. Sridhar, R. Sridharan, and S. Elango. "A Study of Bidirectional Electric Vehicle Charging using MATLAB Simulink." Journal of Electronics and Informatics 6, no. 2 (2024): 77-84
Published
09 May, 2024
Abstract

On considering Electric Vehicles, the rise of Vehicle-to-Grid(V2G) concept has been accompanied with lots of advantages. The V2G technology ensures that no extra electricity needs to be consumed from the grid. It helps the power grid on a larger scale. It enables a bidirectional power flow between the EV battery and the grid. Bidirectional Buck- Boost Converter helps in grid stabilization, financial gains, and effective energy management. The DC-DC Converter does two functions: matching the battery voltage to the motor's rated voltage and controlling power flow under steady-state and transient conditions. The Proportional-Integral (PI) controller is used to correct the errors between commanded set point and the actual value based on feedback. The efficiency of the converter can be increased by using PI controller.

Keywords

Bidirectional DC-DC converter G2V V2G electric vehicle applications

×

Currently, subscription is the only source of revenue. The subscription resource covers the operating expenses such as web presence, online version, pre-press preparations, and staff wages.

To access the full PDF, please complete the payment process.

Subscription Details

Category Fee
Article Access Charge
15 USD
Open Access Fee 100 USD
Annual Subscription Fee
200 USD
Subscription form: click here