Industrial Quality Prediction System through Data Mining Algorithm
Volume-3 | Issue-2
Comparative Analysis an Early Fault Diagnosis Approaches in Rotating Machinery by Convolution Neural Network
Volume-3 | Issue-2
Nakagami-m Fading Detection with Eigen Value Spectrum Algorithms
Volume-3 | Issue-2
Abstractive Summarization System
Volume-3 | Issue-4
Design of Adaptive Estimator for Nonlinear control system in Noisy Domain
Volume-3 | Issue-3
Automated Nanopackaging using Cellulose Fibers Composition with Feasibility in SEM Environment
Volume-3 | Issue-2
Comparative Analysis of Temperature Measurement Methods based on Degree of Agreement
Volume-3 | Issue-3
Transistor Sizing using Hybrid Reinforcement Learning and Graph Convolution Neural Network Algorithm
Volume-3 | Issue-3
A Review on Meshing Techniques in Biomedicine
Volume-3 | Issue-4
EL DAPP - An Electricity Meter Tracking Decentralized Application
Volume-2 | Issue-1
SMART STREET SYSTEM WITH IOT BASED STREET LIGHT OPERATION AND PARKING APPLICATION
Volume-1 | Issue-1
ENERGY AND POWER EFFICIENT SYSTEM ON CHIP WITH NANOSHEET FET
Volume-1 | Issue-1
Abstractive Summarization System
Volume-3 | Issue-4
A Review on Meshing Techniques in Biomedicine
Volume-3 | Issue-4
MIMO BASED HIGH SPEED OPTICAL FIBER COMMUNICATION SYSTEM
Volume-1 | Issue-2
Industrial Quality Prediction System through Data Mining Algorithm
Volume-3 | Issue-2
Comparative Analysis of Temperature Measurement Methods based on Degree of Agreement
Volume-3 | Issue-3
Transistor Sizing using Hybrid Reinforcement Learning and Graph Convolution Neural Network Algorithm
Volume-3 | Issue-3
VIRTUAL REALITY SIMULATION AS THERAPY FOR POSTTRAUMATIC STRESS DISORDER (PTSD)
Volume-1 | Issue-1
Comparative Analysis an Early Fault Diagnosis Approaches in Rotating Machinery by Convolution Neural Network
Volume-3 | Issue-2
Volume - 5 | Issue - 2 | june 2023
Published
20 June, 2023
In industries, for releasing any product into the market, various stages of testing procedure must be done on the product to test its functionality and reliability. The testing procedure has to be frequent and accurate enough to enable early defect detection. Manual testing procedures are time-consuming, need more human resources at the place of testing, have no concept of documentation, and have more chances of human errors. To overcome the variously described limitations of manual testing, test automation is a key tool for providing prompt feedback, tracking of developed firmware versions time-to-time and reducing the tester’s efforts to perform tests task repetitively. The main goal is to speed up test execution cycles and improve the accuracy as well as the performance of the module for end-user customer satisfaction. The proposed system works based on replacing the potentiometer with a relay configuration controlled by the digital output signal of the Programmable Logical Controller and Automated Test Framework. The study describes the transition from manual testing of modules with complex setup environments to automatic testing of modules with implemented hardware changes.
KeywordsPLC Automation Test automation of modules Motor Over Temperature Protection module testing Manual to Automatic testing and extension modules testing.
Full Article PDF